Hardie Plank Lap siding Smooth 8.25" 7" exposure 6,008/sf surface area
Elevated Acadian style home needs siding crew with pump jacks, ladders and the ability to work as a team off the ground.

Hardie Plank Lap siding Smooth 8.25" 7" exposure 6,008/sf surface area

Hardie_Siding_Gable_Porch_View_1.jpg
Murray

Location: Denham Springs LA. 70726

Project Category Exterior Siding | HardiePlank
Message Murray about this project.

Elevated Acadian style home needs siding crew with pump jacks, ladders and the ability to work as a team off the ground.

Duplex style single family home. Total siding surface area including area of windows and doors, 6,008/sf All materials will be provided. Skilled labor with tools, ladders, pump jacks are required. Workers must be able to work off ground safely. Pictures and design plans attached. We should be ready by end of week with material.
2 Images
Hardie_Siding_Gable_Porch_View_1.jpg Hardie_Siding_Gable_Porch_View_2.jpg
0 Videos
1 Documents

Sign In or Register to message Murray.

CAPTCHA Reset Captcha Numbers        

Ask for Help: Empower Your Household in Disaster Recovery

By Murray Wennerlund

I work offline documenting disaster recovery needs. Despite bureaucracy and indifference from officials, I persist in advocating for disaster victims, highlighting systemic issues and achieving positive outcomes through relentless efforts.

How to fail your Own Design Criteria Inspections when Build by Design isn't followed.

By Murray Wennerlund

When undergoing a Design Criteria Build inspection by a municipal inspector, adherence to the building codes is essential to avoid failure. Below are common topics, the associated codes, and reasons an inspector might fail the inspection.

How to Fail Your Municipality's Residential Final Mechanical Inspection.

By Murray Wennerlund

Inspections focus on the proper installation, operation, and accessibility of equipment, condensate drainage, gas appliance safety, dryer duct marking, equipment protection, refrigerant access port security, kitchen exhaust hood compliance, etc.