How to Fail Your Municipality's Residential Slab Pre-Pour Inspection.
Here are some key points and the most common reasons why residential slab pre-pour fail, according to municipal inspectors:
by Murray Wennerlund published 11/20/2024
How to Fail Your Municipal Building Inspections: Common Fire Safety Violations.
Common reasons why municipal building inspections fail related to fire safety violations and non-compliance with ICC codes like IBC, IRC, and IFC. Learn key areas inspectors evaluate and tips for ensuring compliance.
by Murray Wennerlund published 11/25/2024
How to Fail Your Municipality's Residential Mechanical Rough-In Inspection.
Here's a summary of each IRC section followed by common reasons a municipal inspector might fail an inspection based on documented mistakes.
by Murray Wennerlund published 9/16/2024
How to Fail Your Municipality's Residential Electrical Inspection.
Heres a breakdown of common reasons a residential electrical inspection may fail along with some relevant codes from the NEC and IRC.
by Murray Wennerlund published 9/9/2024 updated 9-16-2024
General Contractors and Residential Builders are missing out on $157.25 to $168.00 sqft builds!
General Contractors snubbed 2016 flood victims when asked to construction new homes at 108/sf. Today the same builders are not responding to 157.25 plus per sqft, why?
by Murray Wennerlund published 9/29/2023
How to Fail Your Municipality's Residential Block and Tie Inspection.
These are some of the most common mistakes that municipal residential building inspectors encounter during inspections. Ensuring compliance with the applicable codes can help avoid these failures and ensure a safe electrical system.
by Murray Wennerlund published 12/18/2024
Fire, smoke blocking and air sealing between floors in a home.
By Murray Wennerlund
How to Fail Your Municipality's Residential Block and Tie Inspection.
By Murray Wennerlund